Calibration Testing
TEMPERATURE CALIBRATOR – SEMI STANDARD PRT
Model: 935-14-95H
Range: -80°C to 670°C
Diameter: 6mm
Length (A): 480mm
Sensing Length (B): 25mm
Hand(C): 19 x 120mm
Cable: 2m PTFE
Calibration Testing
TEMPERATURE CALIBRATOR – Semi Standard Type S Thermocouple
Model: 935-14-91/S
Diameter: 5mm
Length(A):300mm
Range: 0 to 1300°C
Application: General Purpose S
Type:S
Calibration Testing
TEMPERATURE CALIBRATOR –Semi Standard Type R Thermocouple
Model: 935-14-91/S
Diameter: 5mm
Length(A):300mm
Range: 0 to 1300°C
Application: Pegasus
Type:R
Ultra Cryogenic Bath Model
Technical Specification for -80°C to +30°C:
Models: SSI CS01
- Floor
- Table top
- Work Space : 150 mm x 150 mm x 250 mm Depth
- Digital Microprocessor based PID auto tuning Temperature indicator cum controller with display resolution of 0.1°C. PT-100 Sensor. (Selectron PID 500).
- Controlling accuracy ±0.1°C, @ minimum temperature.
- High / Low Temperature Deviation Alarm.
Temperature Bath 1:
Range: 150°C to 1200°C
Stability: ±0.05°C @ 150°C ±0.08°C @ 1200°C
Display Resolution: 0.01°C over whole range
Input Channel Accuracy: Thermocouple E, J, K, N: ±0.2°C @ 660°C R: ±0.6°C S: ±0.7°C @ 660°C T ±0.2°C @ 150°C
CJC Accuracy: ±0.35°C
Input Channel Accuracy: RTD ±0.05°C ±0.005% RDG
Stability: ±0.1°C @ 150°C ±0.2°C @ 1200°C
Display Resolution: 0.1°C from 150°C to 999.9°C then 1°C: 0.01°C Over PC Interface
Blackbody Source: ±0.3°C
Cools from 1200°C to 800°C: in 50 minutes*
1200°C to 200°C: in 180 minutes*
*substantially reduced by the cooling adaptor
Heating Rate: 25°C / minute
Best Performance: See Graph
Calibration volume: 33.5mm diameter by 130mm deep
Standard Insert: 4 x 8mm Pockets all 80mm deep + 50mm top insulator
Indicator units: °C, °F, K
Power: 115Vac or 230Vac (50 / 60 Hz) 800 Watts
Dimensions: 384H (including handle) x 212W x 312D mm
Weight: 13kg
Temperature Bath 2:
Range: -35 to +140°C
Stability: 0.02°C
Accuracy – Basic: ±0.2°C
Accuracy – Complete: ±0.15°C
Heating Time: In 15 minutes
Cooling Time: +140 to 0°C In 15 minutes
Calibration Capacity: 145mm depth 8Ø, 6.5Ø, 3 x 4.5Ø
Power: 150W
Traceable Certificate: Included
PC Communications: Included
Software: Included
4-20mA Input: Complete Models
Ramps and Dwells: Yes with Software
Dimensions: 228 x 248 x 143mm
Weight: 6.60kg
RTD
RTD Element: Pt-100×2
Type: Duplex, 3 Wire (Wound On Ceramic)
Cable: 1.5 Mtr. Long Teflon/Teflon Insulated Ss Braided Flexible Cable.
Standard: Cali: Din-43760
Insulation: Mineral Insulated
Sheath Material: Ss-316, (Inconel-600Is N/A)
Sheath Dia: 6mm
Mtg: 1/2″ Npt(M) Adj. Comp. FiDng
Sheath Length: 450mm.
Temp. Range: -80 ° To 600 °C.
Model No:R-200-1-W3-6-316-1/2″Npt(M)-450-B-1500)